How to install vinyl graphics on the truck

Signs area easy to apply, die-cut from a durable 24 inch, 9 years, outdoor adhesive vinyl.

1] Trial-fit your graphics to the vehicle. Take your time, stand back and be sure the fit and the aesthetic are perfect. Then mark the placement with tape or a grease pencil.

2] Remove the wax and any handprints with mineral spirits or alcohol. Wear gloves and work in a well-ventilated area to be safe.

3] Thoroughly douse the surface with wetting agent to allow you to reposition the film if necessary.

4] Peel the backing film away from the vinyl carefully. Don't leave any of the vinyl behind on the backing film.

5] Position the graphic precisely. If you;ve kept the surface wet, it'll be simple to reposition the graphic slightly to hit your marks.

6] After you've squeegeed thoroughly, you can slowly peel the transfer film away from the car.

7] Remove water bubbles by puncturing and squeegeeing the water out through the hole.